Saugumo svarba

Besides reporting Nightscout can also be used to control AAPS. I.e. you can set temp targets or add future carbs. This information will be picked up by AAPS and it will act correspondingly. Therefore it is worth thinking about securing your Nightscout website.

Nightscout parametrai

You can deny public access to your Nightscout site by using authentication roles.

AAPS settings

There is an NS upload only (no sync) function in AAPS settings. By doing so AAPS will not pick up changes done in Nightscout such as temp targets or future carbs.

  • Bakstelėkite 3-taškų meniu viršutiniame dešiniajame kampe savo AAPS pradžios ekrane.

  • Pasirinkite „Nustatymai“.

  • Slinkite žemyn ir bakstelėkite „Išplėstiniai nustatymai“.

  • Aktyvuokite „Įkelti tik į NS“

Nightscout upload only

Tolimesni saugumo nustatymai

Keep your phone up to date as described in safety first.

Rankinis Nightscout diegimas

It is assumed you already have a Nightscout site, if not visit the Nightscout page for full instructions on set up, the instructions below are then settings you will also need to add to your Nightscout site. Your Nightscout site needs to be at least version 10 (displayed as 0.10…), so please check you are running the latest version otherwise you will get an error message on your AAPS app. Some people find looping uses more than the azure free quota allowed, so heroku is the preferred choice.

  • Eikite į

  • Spustelėkite jūsų Programos Paslaugos pavadinimą.

  • Spustelėkite taikomosios programos nustatymus (azure), arba Parametrai > „Atskleisti konfigūracijos kintamuosius (heroku)

  • Pridėti arba redaguoti kintamuosius taip:

    • ENABLE = careportal boluscalc food bwp cage sage iage iob cob basal ar2 rawbg pushover bgi pump openaps


    • SHOW_FORECAST = openaps

    • PUMP_FIELDS = reservoir battery clock

    • Various alarms can be set for monitoring the pump, battery % in particular is encouraged:

      • PUMP_WARN_BATT_P = 51

      • PUMP_URGENT_BATT_P = 26


  • Spustelėkite „Išsaugoti“ skydelio viršuje.

Pusiau automatinis Nightscout diegimas

Fellow looper Martin Schiftan offered a semi-automated Nightscout setup for many years free of charge. As number of users increased so did cost and therefore he had to start asking a small fee starting October 2021 - starting at €4,17 per month.


  • Galite įdiegti Nightscout keliais paspaudimais ir iškart naudoti.

  • Sumažinti rankų darbą, nes Martin bando automatizuoti administravimą.

  • Visi nustatymai gali būti atliekami per patogią internetinę sąsają.

  • Paslauga apima automatinį valandinės bazės patikrinimą, naudojant Autotune.

  • The servers are located in Germany and Finland.

An alternative would be - starting at $11,99 per month.